Online-Religion in Japan: Websites and Religious Counseling from a Comparative Cross-Cultural Perspective

This article considers the nature of online religion by examining the websites and religious counseling activities conducted by new Japanese religions. Beginning with an overview of the widespread use of the Internet in Japan and its use in religion, the article examines the cultural and social factors that keep the religious use of the Internet from becoming as pervasive in Japan as it is in the U.S. The article then describes a website with elements of online religion and the Internet-based religious counseling services being provided by ministers of the new Shintō-derived religions of Konkōkyō and Tenrikyō. These activities have successfully given some people who need religious assistance access to religious teaching. In concluding, the article examines the reasons for the success of these efforts, as well as the reasons why they have not expanded in scope, in light of the cultural and organizational advantages and disadvantages that affect Internet use.     

Distributed architecture for energy management D-structure

Electric power systems are expanding in size and complexity, and the requirement for the energy management system (EMS) is becoming more important. In this computer control system, a single control computer is used mainly as the primary computer and its software is very complicated because of its hugh number of small, quick tasks to obtain high response speed. Therefore, much effort is needed to develop and modify the programs, and the responsiveness of this centralized architecture varies greatly when many faults occur in the power system. This paper describes a new distributed architecture for the EMS. Distributed processors execute the functions cooperatively with periodic access to the common bulletin board database in which information about the power system exist. This architecture facilitates the software development and maintenance, and it also enhances the performance by the parallel processing of the distributed functions.     

Regulation of Kv4.2 and Kv1.4 K+ channel expression by myocardial hypertrophic factors in cultured newborn rat ventricular cells

Postnatal development and myocardial hypertrophy are associated with alterations in cardiac voltage-gated K+ channels. To investigate mechanisms underlying this K+ channel remodeling, expression of Kv4.2 and Kv1.4 K+ channel alpha-subunits was examined in cultured newborn rat ventricular myocytes by Western blot analysis using polyclonal antibodies against each of the subunits. At day 5 of cell culture, Kv1.4 protein was expressed at higher level than Kv4.2; as the age of culture progressed, Kv1.4 was significantly diminished while Kv4.2 increased with time in culture and became the predominant K+ channel protein. Such K+ channel isoform switch from Kv1.4 to Kv4.2 resembles that of the development in vivo. A 72-h treatment with exogenous triiodothyronine (T3, 0.1 microM) to cultured neonatal myocytes enhanced the expression of Kv4.2 by 73% and decreased the Kv1.4 expression by 22%. The effects of T3 were associated with an increase in the protein-to-DNA ratio indicating myocyte hypertrophy. On the other hand, a 72-h treatment with cardiac non-myocyte cell (NMC)-conditioned growth medium (NCGM) or phenylephrine (20 microM) induced similar cell hypertrophy, but in sharp contrast to T3, both markedly suppressed the Kv4.2 channel protein level. In addition, the trophic and the Kv4.2-downregulating effects of NCGM could be mimicked by exogenous endothelin-1 (0.1 microM), a paracrine factor secreted from cardiac NMCs. Our observations for the first time suggest that cardiac Kv4.2 and Kv1.4 K+ channel alpha-subunits are differentially regulated by a variety of myocardial hypertrophic factors. That T3 accelerated the developmental K+ channel isoform switch from Kv1.4 to Kv4.2 in vitro indicates the critical importance of thyroid hormone in postnatal K+ channel remodeling. Cardiac NMCs and alpha-adrenoceptor activation may contribute to the reduced outward K+ channel density in hypertrophied cardiomyocytes.     

A lightweight sensing method of tooth-touch sound for disabled person using remote controller

To support disabled people to use remote controllers, several biological signals are used. The tooth-touch is one of desirable biological signals. This is because it is the simple and natural human behavior. However, a sophisticated signal processing to extract only the tooth-touch sound is needed since the tooth-touch sound is mixed with the voice sound. This paper proposes a lightweight sensing method extracting the tooth-touch without a sophisticated signal processing to eliminate only voice sound from the sound wave in which tooth-touch and voice are mixed. Instead of the audible sound wave, proposal uses a shock wave (i.e., ultrasonic wave) which is generated when the upper tooth and the lower tooth hit each other. Using the shock wave generated to detect the tooth-touch, a trivial high-pass filter can eliminate only voice sound in the lower frequency domain than in the ultrasonic domain including the tooth-touch. Through a preliminary experiment that uses a conventional microphone and well-known digital high-pass filter, we show that the used electret microphone can sense the tooth-touch as ultrasonic wave and the high-pass filter can extract only tooth-touch. Then, we show some robustness of our method by using the sound waves including the voice and tooth-touch. In addition, we design the filtering hardware to implement a small and cheap system-on-chip achieving a real-time operation. Through the implementation of Field Programmable Gate Array, and the simulation, we show that our hardware is small and performs well for a real-time operation.     

Co-crosslinking blend of incompatible polymers VI: Poly(vinyl chloride) toughened with polyethylene via a co-crosslinking technique

A binary blend which consists of two incompatible polymers such as poly(vinyl chloride) and polyethylene has been performed through a partial co-crosslinking reaction with peroxide to give a co-crosslinked blend with a uniform dispersion of small polyethylene particles and with an improved mechanical property. The results are obtained through the formation of a co-crosslinked product which acts as a potential solid phase dispersant as well as a well-bonded reinforcing interlayer on polyethylene particles uniformly dispersed in poly(vinyl chloride) matrix. The resulting blends (PVC/PE=10/90 wt) give carbon spherules of 0.5 to 1m diameter through pressure-carbonization at 650° C for 1 h.     

Pulsed NMR study in nuclear ordered solid3He

The nuclear spin dynamics in nuclear spin ordered solid³He in low magnetic fields on the melting curve has been studied by pulsed NMR down to 0.6 mK. The free induction decay signals (FID) were measured in single crystals of solid³He at three operating frequencies of 920, 1380, and 1840 kHz. The FIDs were nonexponential and dependent on the rf pulse strength _p H ₁ t _w , where is the gyromagnetic ratio,H ₁ is the rf field strength, andt _w is the pulse width. At small _p they decayed almost linearly in time with a small exponential tail at the end. When _p was further increased they became shorter and neither exponential nor linear in time. At large _p they decayed very rapidly and sometimes could not be observed at all because of the dead time of the NMR detection system. Such behavior of the FID was observed in many different single crystals in the given temperature range at 920 kHz. Tsubota and Tsuneto have shown by solving the nonlinear equations of motion numerically that the motion of the nuclear spin becomes chaotic when the tipping angle exceeds a critical value. Comparing their result with our experimental results, we concluded that some of the results of the rapid decay of the FID at large _p might be attributed to the onset of the chaotic motion. At 1840 kHz it is expected that the nonlinear effects in the equations of motion become less effective than that at 920 kHz. In fact, at this operating frequency the FIDs even at large _p and the tipping angle-dependent frequency shift could be observed. These frequency shifts were in rather good agreement with Namaizawa's theory provided an effective tipping angle was taken into account.     

Shock consolidation of diamond powders

Fine and coarse diamond powders were shock-compacted at peak pressures of 77, 90, and 108 GPa. The densification and consolidation mechanisms of diamond powders under shock compression were investigated. The densification behaviour of the diamond powders depended strongly on the particle size of the starting materials. Fine diamond powders were densified primarily by plastic deformation, while coarse diamond powders were densified mainly by particle fracture. The relative densities of the compacted diamond samples increased with an increase in the initial particle size of the diamond and with shock pressure. The consolidation mechanism of the diamond powders under shock compression was closely related to the densification mechanism, and depended on the initial particle size of the diamond. At a shock pressure of 90 GPa, particle sizes of 2 to 4 m grade and 10 to 20 m grade were desirable as the starting material in order to produce well-bonded diamond compacts. Diamond compacts having microhardness values over 80 GPa were obtained from 2 to 4 m grade and 10 to 20 m grade diamond powders at a shock pressure of 90 G Pa, and their relative densities were 88.5% and 91.0%, respectively.     

Molecular Mechanisms and Tumor Biological Aspects of 5-Fluorouracil Resistance in HCT116 Human Colorectal Cancer Cells

5-Fluorouracil (5-FU) is a cornerstone drug used in the treatment of colorectal cancer (CRC). However, the development of resistance to 5-FU and its analogs remain an unsolved problem in CRC treatment. In this study, we investigated the molecular mechanisms and tumor biological aspects of 5-FU resistance in CRC HCT116 cells. We established an acquired 5-FU-resistant cell line, HCT116R^F10. HCT116R^F10 cells were cross-resistant to the 5-FU analog, fluorodeoxyuridine. In contrast, HCT116R^F10 cells were collaterally sensitive to SN-38 and CDDP compared with the parental HCT16 cells. Whole-exome sequencing revealed that a cluster of genes associated with the 5-FU metabolic pathway were not significantly mutated in HCT116 or HCT116R^F10 cells. Interestingly, HCT116R^F10 cells were regulated by the function of thymidylate synthase (TS), a 5-FU active metabolite 5-fluorodeoxyuridine monophosphate (FdUMP) inhibiting enzyme. Half of the TS was in an active form, whereas the other half was in an inactive form. This finding indicates that 5-FU-resistant cells exhibited increased TS expression, and the TS enzyme is used to trap FdUMP, resulting in resistance to 5-FU and its analogs.     

Synthesis of Sn-Incorporated Folded Sheets Mesoporous Materials (Sn-FSM-16)

Sn-incorporated folded sheets mesoporous materials (Sn-FSM-16) with various contents of Sn were synthesized by using a mixture of water glass, SnCl₄ and NaOH as starting materials. Hexadecyltrimethyl-ammonium chloride (surfactant) was used to intercalate into the layered silicate. The reaction process was followed by measurements of XRD patterns of intermediates. The Sn-FSM-16 was formed via the following mechanism: (1) layered silicates such as - - and -Na₂Si₂O₅ were formed as intermediates by the calcination of the mixture of the starting materials; (2) the surfactant was intercalated into the layered silicates; (3) the surfactant-silicate complex with hexagonal structure was obtained as a precursor of Sn-FSM-16; (4) the precursor was calcined to decompose the surfactant in the interlayer and was changed to Sn-FSM-16. The structural aspect of Sn in Sn-FSM-16 was studied by XPS profiles of Sn 3d _5/2 and Si_2p, ²⁹ Si MAS NMR and FTIR. The content of Sn in Sn-FSM increased with increasing concentrations of both Sn and NaOH in the starting materials. The surface area of Sn-FSM-16 decreased with an increase of Sn content in Sn-FSM (1160–620 m²/g).